Datasheet for Solar charge controller MPPT 100V/15A

 

Ultra-fast Maximum Power Point Tracking (MPPT)

 

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

 

Load output

 

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.

Alternatively, an intelligent battery management algorithm can be chosen: see Battery Life.

The load output is short circuit proof.

 

Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. A special interface cable may be needed, please see the manual.

 

Battery Life: intelligent battery management

 

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The Battery Life algorithm will monitor the state of charge of the battery and, if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%. From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

 

Certificates

Compliant with European Standards (CE)

RoHS compliant

SGS

ISO 9001

MPPT Charge Controller 100V / 15A

R848.70Price
  • Battery voltage: 12/24V Auto Select 

    • Rated charge current:  15A 
    • Nominal PV power, 12V   1a,b):  200W 
    • Nominal PV power, 24V   1a,b):  400W 
    • Maximum PV open circuit voltage: 100V 
    • Peak efficiency: 98%
    • Self-consumption: 10 mA
    • Charge voltage 'absorption':  14,4V/28.8V (adjustable)
    • Charge voltage 'float':  13,8V/27.6V (adjustable)
    • Charge algorithm: multi-stage adaptive
    • Temperature compensation:  -16 mV / °C resp. -32 mV / °C
    • Continuous/peak load current:  15A / 50A
    • Low voltage load disconnect:  11,1V / 22,2V or 11,8V / 23,6V or Battery Life algorithm
    • Low voltage load reconnect:  13,1V / 26,2V or 14V / 28V or Battery Life algorithm
    • Protection:  Battery reverse polarity (fuse) Output short circuit / Over temperature
    • Operating temperature:  30 to +60°C (full rated output up to 40°C) 
    • Humidity:  95%, non-condensing
    • ENCLOSURE 

        Dimensions (h x w x d) 101 x 114 x 47 mm

© 2007-2019. Proudly created by SETSOLAR (NYPB) 

All Rights Reserved. E&OE Reg.no. 2007/041327/23

  • Facebook - Black Circle
  • Twitter - Black Circle